Home
Log In
Heating
Recuperators
Hot water products
HEAT EXCHANGERS
Expansion vessels
Valves
Pipes
Pumps and groups
Ventilation and fans
Generators & CHP
Aircojmpressors
Environmental products
Limit switch
Yard and Cleaning
Hydraulic tools
Wind power
LED
Service
Home
::
Generators & CHP
::
UPS
:: Sigma 4KVA
UPS
Product 9/10
Previous
Return to the Product List
Next
Sigma 4KVA
Sigma 4KVA
Model: S4KL
Shipping Weight: 15 lbs
€1,506.00
4kva/2800w, 120vdc, 1 phase
10*7Ah batteries,
Topology On Line Double Conversion
Support input type Inverter, generator
Input voltage range 138V to 300V (0~60% load), 138~161V to 300V (60%~80% load) , 161~184V to 300~286V (80%~100% load)
Tulojännite Input: 1 phase, voltage (176~276)VAC, 46-54 Hz Bypass voltage range 230+/-10 %VAC (Adjustable) frequency 50/60 Hz +/- 5 Hz (Auto sensing) power factor >0.98 @ full load
Lähtöjännite Output: 4KVA 2800W
Voltage 220/230/240Vac ± 1%
Output waveform Pure Sine Wave
Harmonic distortion THD< 3% @ linear load (Line Mode) THD< =6% @ non-linear load
Output frequency (Battery Mode) 50 / 60Hz ±0.1Hz
Current crest ratio 3:1
Overload capacity Line mode:
Over 110% for 2mins, then transfer to bypass and alarm.
Over 150% for 1s, then transfer to bypass and turn off output after 1min and alarm.
Battery mode: Over 110% for 30s, then turn off output and alarm. Over 120%, for 1s, then turn off output and alarm
Transfer time 0ms
Dimension(W×D×H)(mm×mm×mm)(565*565*164)*2
Backup time 4 (full load) - 10 min
Interface port(s) RS232+Dry contact (DB9) /RJ45/SNMP Slot
Optional cards SNMP Card/AS400 Relay Card
LCD display information for Load / Battery / Input / Output and Operating Mode
Audible alarm Actively audible alarm for utility failed/ battery low /overload condition
Silence switch Yes
Noise level <52dB@1Meter
Online double-conversion pure sine wave output for load specifically designed for servers
Rotatable LCD display design
Tower/rack multiple configuration for flexible installation
Microprocessor control guarantees high reliability
Adopting high frequency full bridge topology for high steady performance
High input power factor correction
Selectable various output range and operating mode
ECO mode to save more energy
Cold start function
Built-in dry contact/RS-232/EPO communication port
SNMP allows for web-based remote or monitoring management
Optional AS400 relay card
Enable to extend runtime with scalable external battery pack
Over-load, short-circuit, and over-heat protection
Hot-swappable battery design
19-inch rack mount kit available for all models for 4KVA and 6KVA
Write Review
Languages
Search
Advanced Search
Information
About Us
Shop by Brand
Shipping & Returns
Privacy Notice
Conditions of Use
Accessibility
Contact Us
Order Status
Site Map
More Information
Page 2
Page 3
Page 4
Home
Sivustokartta
Käyttöehdot
Toimitus ja palautus
Tietoa meistä
Copyright © 2024
profil.fi
. Powered by
Zen Cart