ESP Electrostatic filter for smoke gas 4800 m3/h

(image for) ESP Electrostatic filter for smoke gas 4800 m3/h
ESP Electrostatic filter for smoke gas 4800 m3/h
(image for) ESP Electrostatic filter for smoke gas 4800 m3/h
ESP Electrostatic filter for smoke gas 4800 m3/h
(image for) ESP Electrostatic filter for smoke gas 4800 m3/h
ESP Electrostatic filter for smoke gas 4800 m3/h
(image for) ESP Electrostatic filter for smoke gas 4800 m3/h
ESP Electrostatic filter for smoke gas 4800 m3/h
(image for) ESP Electrostatic filter for smoke gas 4800 m3/h
ESP Electrostatic filter for smoke gas 4800 m3/h
(image for) ESP Electrostatic filter for smoke gas 4800 m3/h
ESP Electrostatic filter for smoke gas 4800 m3/h
  • Model: BS26624
  • Shipping Weight: 850 lbs

Starting at: €6,640.00

Please Choose:

D accessories









Purification level








The electrostatic precipitator makes it possible to remove dust from flue gas. For this purpose, it uses the electrostatic force operating on these particles of dust. As a result of high voltage, particles of dust receive an electric charge. Due to this, with the use of electrophoresis, the dust is deposited on the electrode with the opposite charge

  • The electrostatic precipitator's operation is based on the precipitation of dust from the stream of flue gas and its deposition on the surface of cumulative electrodes under the effect of the electrostatic force. 
    The electrostatic precipitator contains: a electrode, a fastening bar with a ceramic insulator, a cover made from acid-resistant steel, as well as a power supply unit with a high voltage generator. 
    The electrode generating corona discharges is made from steel. The electrode was placed in the flue gas duct. The system of insulated electrodes is fed with high voltage by means of a high voltage generator. The discharge electrode consists of the earthed walls duct (made from acid-resistant steel). The dust, which is precipitated from flue gas, is deposited on the walls. 
    The electrostatic precipitator is also characterized by a simple installation process and ease of operation.
  • Power 1300 - 2400W
  • Air Flow 4800 m3/h
  • Size L*W*H 2400×1100×775

  • Power supply 3P+N+PE AC380 50HZ
  • Material of Construction: AISI304 stainless steel filter cells, A3 carbon steel housing
  • Pressure drop 100 - 140 PA
  • Cleaning efficiency levels
    90% (general kitchen areas)
    95% (general kitchen areas)
    98% (general kitchen areas)
    98% (stir-fry kitchen areas)
    98% (bbq kitchen areas)

  • Options

  • Automation steam cleaning
  • Mist wheel
  • Fresh air outlet in front panel
  • UV odour eliminator
  • tubular filter cell - additional spare part. The ESP unit itself already includes one tubular
    filter cell. During maintenance, to avoid interrupting the operation, the used filter cell can be removed for cleaning and replaced with the spare one, so the equipment can keep running continuously.
  • Active carbone filter
  • Fire damper

Copyright © 2025 profil.fi. Powered by Zen Cart
(image for) Energiatukku