Pressure switch Hydro-Brio controll unit

The HYDRO BRIO controller is an electronic device used to control the operation of a water pump.
It is used to control the switching on and off of the pump depending on the water consumption. The pump is switched on and off automatically. Switching on of the pump takes place when the pressure drops below the pre-set switching pressure, and switching off when the maximum pressure the pump generates is reached and the water flow in the hydraulic system stops.
This design means that in practice, when water intake starts, the pump switches on, and when water intake stops, the pump switches off after a few seconds.
An additional advantage of the HYDRO BRIO is that the switching pressure of the pump can be adjusted.
Due to its design, the use of HYDRO BRIO allows automatic operation of the pump without a pressure tank, switch, pressure gauge and the connections between these components associated with conventional installation.
The unit is particularly suitable when there is little space available for a classic hydrophore or when the pump must be frequently dismantled.
Another advantage of the HYDRO BRIO is that the unit stops the pump in the event of a water shortage, i.e. it protects the pump from dry running.
TECHNICAL DATA
AC supply voltage* ~90 ÷ 260 V
Max. rated current of the controlled pump 10 A
Degree of protection IP 65
Pump control power range 0.1 ÷ 2.2 kW
Switching pressure control range 0 ÷ 10 bar
Max. flow rate 160 l/min
Max. permissible operating pressure. 15 bar
Max. fluid temperature. 800C
Max. working environment temperature 350C
Working position vertical
Connection spigots 1" x 1"
Weight 1 kg