Description
BRIO13 pressure controller
Brio-13 automatically starts and stops the pump in case of pressure drop and flow stop respectively. In addition, BRIO SK-13 stops the pump in the absence of water, protecting it from damage during dry running. The BRIO SK-13 device does not have the ability to adjust the shut-off pressure, therefore, in working conditions, the pump will switch off after reaching the maximum parameters (pressure).
Technical data:
Supply voltage 230V
Rated frequency 50/60 Hz.
Maximum current 10A
Maximum allowable pressure 10 bar
Maximum liquid temperature 55ºC
Maximum flow 2.66L/s; 160l/min ; 9.6 m³/h
Connection stub diameter 1"
Degree of protection IP 65