Actuator MP10CR with built-in constant temperature controller

Actuator MP10CR with built-in constant temperature controller 

Actuator with built-in constant temperature controller MP 10 CR are used in central heating systems with a mixing valve. The actuator maintains a constant temperature of the heating circuit medium. Using the built-in DIP switch (located under the actuator housing), we can select additional functions such as: - actuator rotation direction, - minimum temperature limit - selectable +60 or +70°C, - maximum temperature limit - +55°C, - mixer protection against blocking. No external controllers are required for the device to operate. The actuator's operation, i.e. the actuator's rotation direction, is indicated by LED diodes. Upon request, the actuator can be mounted on mixing valves from other companies (see below).

 Technical data:

Supply voltage:      230 V, +/- 15V, 50/60 Hz
Power consumption:    3,5 VA
Connection:    plug 230 V
Torque:    10 Nm - for nominal voltage
Rotation angle:    90°
90 degree rotation time:    135 seconds
Protection class:    II
Degree of protection:    IP 40
Supply temp. sensor:    NTC, 8,5kΩ for + 25°C, dł. 1 m
Maksymalna temperatura pomiaru:    110°C
Temperature regulation range for heating:    20 - 80 °C
Maximum limit temp.    +55 °C
Minimum limit temp.    +60 °C or+70 °C